• Your Vacuum Can’t Do it All

    Your vacuum is one of your most frequently used cleaning supplies, and probably one of the most expensive.  With all its power and myriad of attachments, it may seem like it can handle just about anything.  But whether your machine is bagless or bagged, there are times when it simply should not be used.  Avoid going over the following items, which can wreak havoc and drastically shorten (or even end) the life of your vacuum cleaner.

    Vacuum on carpet

    1. Shards of glass

    Large pieces of broken glass can be extremely hazardous to your vacuum.  They can tear the bag, get stuck in the hose, or scratch the interior of the machine.  So the next time you drop a plate or tip over a glass, keep your vacuum in the closet and clean up using a broom.

    1. Fine dust

    Sanding residue, ashes, and other tiny particles can immediately clog the bag/filter and cause your vacuum to spit dust back into the air, according to Carolyn Forte, director of the Home Appliances and Cleaning Products Department at the Good Housekeeping Research Institute.  This is a job suited for a more durable machine, such as a shop vac.

    1. Anything wet

    Going over anything wet or moist can short circuit your vacuum or even cause electric shock.  A wet/dry vacuum is needed for big jobs; otherwise, use a paper towel to clean up spills.

    Wet floor

    1. Fireplace ashes

    Not only are they fine particles, fireplace ashes trap heat and should not be cleaned up with a normal vacuum.  Instead, let the ashes cool for at least four days before cleaning them up using a wet/dry vacuum.

     

    1. Hard items such as paper clips, rocks, or coins

    Stop and pick up small items by hand, as these can get stuck in the rotating brush or break plastic parts inside the machine.

     

    Extra Tips to Keep Your Vacuum Running Efficiently:

    1. Don’t let the vacuum run overfilled. A filled dust bin or bag will greatly reduce the quality of performance, and can also cause the machine to overheat, which may result in permanent damage.
    1. Don’t vacuum over the cord. Although these cords are usually very tough, going over an electrical cord with a spinning brush can cause the cord to become damaged or frayed, eventually making it unsafe for use.